Filamora Studios › Choosing a 3D printer

Bambu Lab H3C

Bambu Lab’s tool changer: nine PrintTools, each with its own filament path and heated nozzle, docked and ready, so it swaps colour or material in about six seconds with very little waste.

Our take

Bambu Lab’s tool changer: nine PrintTools, each with its own filament path and heated nozzle, docked and ready, so it swaps colour or material in about six seconds with very little waste. Enclosed, with a heated chamber and built-in filament drying, on a 330 mm plate.

What’s good

Worth knowing

What you can make on it

It prints 122 of our 123 customisable 3D templates in one piece.

What’s too big for it

1 of our templates are too big for its plate at their default size. Each fits at the size given: set it in the designer, or print it in parts where the template offers it.

Printing in colour

It prints in more than one colour: nine PrintTools, so nine colours or materials with almost no purging. Our multi-colour designs come out in their colours in one go, from a 3MF. All 78 of our multi-colour templates fit it in one piece.

What our popular templates cost to print on it

The filament each takes at its default size (PLA, 15% infill, two walls, 0.2 mm layers), at this printer’s pace and power, with PLA at about £20 a kg and electricity at 25p a kWh.

Compare it with

Questions

What can I print on the Bambu Lab H3C?

Its build size is 330 × 320 × 325 mm, which prints 122 of our 123 customisable 3D templates in one piece at their default size. Most of the rest can be made smaller in the designer, or are printed in parts.

Is the Bambu Lab H3C enclosed?

Yes. That keeps the warmth in for ABS and ASA, and the noise and smell in too.

Can the Bambu Lab H3C print in more than one colour?

Yes. It prints in more than one colour: nine PrintTools, so nine colours or materials with almost no purging. Our multi-colour designs come out in their colours in one go, from a 3MF. All 78 of our multi-colour templates fit it in one piece.

How much does it cost to print on the Bambu Lab H3C?

A typical 50 g print takes about 2 h 15 min and costs about £1.09 in PLA and electricity, at typical UK prices. The designer works out each design’s cost, time and filament for your printer.

How much is the Bambu Lab H3C?

About £2,199 on the maker’s UK store when we checked (26 October 2026). Prices change often, especially in sales, so see the shop for today’s.

On our blog: Multi-colour printing without an AMS

On our blog: Choosing your first 3D printer in 2026

Choosing a 3D printer