Spinner Ring

About the Spinner Ring

A spinner ring with a band that spins round the outside, printed in place standing up. Pick a UK or US ring size, and a smooth, ridged, twisted or dotted band.

What you can change

• Ring size: US 4 / UK H, US 4.5 / UK I, US 5 / UK J½ and US 5.5 / UK K½, and 16 more.
• Spinner: smooth, ridged, twisted ridges and dotted.
• Pick the band and spinner colours.
• Adjust width and spin clearance.

Size

About 26 × 26 × 8 mm (width × depth × height), one piece at the starting settings.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

About 2 g of PLA and about 15 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Ideas for using it

• A fidget ring for anxious hands.
• A matching pair for friends.
• Try silk or glow filament for the spinning band.
• A quick, small gift that fits in a card.

Questions

What size is it?

About 26 × 26 × 8 mm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.