Poop-Bag Holder

A holder for a roll of dog poop bags that clips to the lead, with the dog's name standing out up the front, a hole in the bottom to pull the bags through and a screw-on cap with a paw print. Sized to your roll.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Poop-Bag Holder

A poop-bag holder that clips to the lead, with the dog’s name standing out up the front, a hole in the bottom to pull the bags through, and a screw-on cap with a paw print. Sized to your roll.

Poop-Bag Holder: a customisable 3D print, shown at its starting settings

What you can change

Type your own dog's name.
Make one, or a whole batch at once: paste a list of names and get one each.
Font: 26 to choose from, from script to stencil.
Pick the holder and paw print colours.
Adjust roll of bags, across and roll of bags, long.

Size

About 44 × 47 × 63 mm (width × depth × height), one piece at the starting settings.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

About 25 g of PLA and about 1 hour 30 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Both parts print without supports: the holder standing up, the cap upside down so the paw print is in its first layers (swap filament after them, or let the AMS). The cap screws on, three turns. Feed the first bag out through the hole in the bottom.

Ideas for using it

Always have bags on the walk, clipped to the lead.
A new-dog or birthday gift with the dog’s name on it.
One for each lead, so the bags are always on the right one.
A gift for a dog walker or a puppy class.

Questions

What size is it?

About 44 × 47 × 63 mm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.