Plant Pot

Tapered pot with drainage hole and saucer.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Plant Pot

A tapered plant pot with a drainage hole and a saucer to catch the water. Set the size to fit the plant, from a small succulent to a houseplant.

Plant Pot: a customisable 3D print, shown at its starting settings

What you can change

Adjust top diameter, bottom diameter, height and wall thickness, and more.
Turn on or off: include saucer.

Size

About 10 × 10 × 9 cm (width × depth × height), one piece at the starting settings.

What you download

An STL or 3MF for any slicer.

Printing it

About 84 g of PLA and about 4 hours 50 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Ideas for using it

Pot succulents and cacti for a windowsill.
A matching set in different sizes for a shelf.
A gift pot for a cutting or a seedling.
Print in PETG for pots that live outside.

Questions

What size is it?

About 10 × 10 × 9 cm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.