Clicker Display Stand

Tiered steps for a collection of clickers, each row higher than the one in front so every face shows, with a socket for each pot and a name along the front. Sized to match your clickers, for pots or Halloween cauldrons.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Clicker Display Stand

A clicker display stand: tiered steps for a collection, each row higher than the one in front so every face shows, with a socket for each pot and a name along the front. Sized to match your clickers, for pots or Halloween cauldrons.

Clicker Display Stand: a customisable 3D print, shown at its starting settings

What you can change

Type your own name along the front.
Pots: pots and cauldrons with feet.
Font: 26 to choose from, from script to stencil.
Pick the stand and name colours.
Adjust clicker head width, clicker pot height, clickers in each row and rows, and more.

Size

About 21.9 × 12.9 × 7.2 cm (width × depth × height), one piece at the starting settings.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

About 317 g of PLA and about 17 hours 50 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Prints as it stands, with no supports. The name is inlaid in the top layers of the front ledge, so swap filament (or let the AMS) for just those. The pots sit loose in their sockets; turn them so the keyring tabs point back.

Ideas for using it

Show off a child’s clicker collection on a shelf.
A display for a craft fair stall.
A seasonal set: Halloween, Christmas and Easter clickers together.
A gift with a few clickers already in place.

Read: How to make a 3D printed fidget clicker with a keyboard switch

Questions

What size is it?

About 21.9 × 12.9 × 7.2 cm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.