Drawer Organiser

About the Drawer Organiser

A drawer organiser tray sized to the inside of your drawer, with a grid of compartments, scooped floors that make small things easy to pick out, and rounded corners. If your drawer is bigger than your print bed, it splits into trays that sit side by side.

What you can change

• Pick its colour.
• Adjust drawer width, drawer depth, tray height and compartments across, and more.

Size

About 15 × 19.9 × 4.5 cm (width × depth × height), one piece at the starting settings.

What you download

An STL or 3MF for any slicer.

Printing it

About 331 g of PLA and about 18 hours 30 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Ideas for using it

• Make-up and hair things in a dressing-table drawer.
• Stationery in a desk drawer, with long rows for pens.
• Screws, nuts and washers in a workshop drawer: the scooped floors make them easy to pick up.
• Jewellery and watches in a bedside drawer.

Questions

What size is it?

About 15 × 19.9 × 4.5 cm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.