Gridfinity Bin
Stackable Gridfinity storage bin with dividers, label shelf and optional magnets.
Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.
About the Gridfinity Bin
A Gridfinity bin generator: set the width and depth in grid units and the height in 7 mm steps, add dividers, a label shelf and magnet holes, and download a bin that drops into any Gridfinity baseplate. Make the exact size your drawer and your parts need, instead of hunting for one that’s close.
What you can change
- Adjust width, depth, height and dividers across width, and more.
- Turn on or off: stacking lip, label shelf and magnet holes.
Size
About 84 × 42 × 25 mm (width × depth × height), one piece at the starting settings.
What you download
An STL or 3MF for any slicer.
Printing it
About 23 g of PLA and about 1 hour 30 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.
Read: Gridfinity explained: sizes, baseplates and how to fit your drawer
Questions
What size is a Gridfinity unit?
Each grid unit is 42 × 42 mm, and the height goes up in 7 mm units. A 2 × 1 bin, 3 units tall, is 84 × 42 mm and about 25 mm high including its feet.
What magnets does it take?
The standard 6 × 2 mm round magnets, glued into the holes in its feet. They hold the bin to a magnet baseplate or the Gridfinity Wall Plate.
Will it work with bins and baseplates from elsewhere?
Yes. It follows the Gridfinity standard, so it fits baseplates and stacks with bins made to the same spec.
Which printers and slicers does it work with?
Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.
Can I sell what I make?
On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.