Filamora Studios › Desk & gadgets
Personalised Controller Stand
A games controller stands in it, leaning back, with the gamer's name raised on a sloping front panel. Sized to your controller, it prints standing up with no supports.
Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.
About the Personalised Controller Stand
A personalised games controller stand: the controller stands in it on its bottom edge, leaning back, with the gamer’s name raised on a sloping front panel. Set the room for your controller and the height of the back; it prints standing up as it’s used, with no supports.
What you can change
- Type your own name.
- Make one, or a whole batch at once: paste a list of names and get one each.
- Font: 26 to choose from, from script to stencil.
- Pick the stand and name colours.
- Adjust width, room for the controller, back height and front panel height.
- Turn on or off: cut-out in the back.
Size
About 11 × 10.6 × 6.8 cm (width × depth × height), one piece at the starting settings.
What you download
An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.
Printing it
About 58 g of PLA and about 3 hours 20 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.
Prints standing as it's used, with no supports: the front slopes at 40° so the name builds up cleanly. Swap filament for the name (or let the AMS). Measure your controller's thickness at the bottom of its grips for "Room for the controller".
Questions
Which controllers does it fit?
Measure your controller’s thickness at the bottom of its grips and set it as the room for the controller: most console and PC controllers fit with the default.
Why does the front slope?
So the raised name prints cleanly without supports, and it’s easier to read on a desk.
Do I need a multi-colour printer?
No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.
Which printers and slicers does it work with?
Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.
Can I sell what I make?
On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.