Filamora Studios › Christmas

Light-Up Christmas Bauble

A bauble that glows: Merry Christmas or a name and year round the middle, snowflakes, stars or a snowy forest round the rest, made as a lithophane and lit by an LED bauble light pushed into its neck. Prints standing on its flat foot, no supports.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Light-Up Christmas Bauble

A Christmas bauble that lights up: Merry Christmas or a name and year round its middle, and snowflakes, stars or a snowy forest round the rest, made like a lithophane so the picture shows when an LED bauble light in its neck is on.

Light-Up Christmas Bauble by Filamora Studios: a customisable 3D print, shown in use at its starting settings

What you can change

  • Type your own words on the front and A second line, smaller.
  • Picture: snowy forest at night, snowflakes and stars.
  • A figure on the front: none, stag, leaping reindeer and doe and fawn, and 25 more.
  • Font: 35 to choose from, from script to stencil.
  • Bottom: A small flat foot and round all over.
  • Lit up: the picture dark on a bright glow and the picture glowing on a darker wall.
  • Detail: draft, normal and fine.
  • Pick the bauble colour.
  • Adjust shuffle the picture, size of the words, space between the letters and diameter, and more.

Size

About 80 × 80 × 78 mm (width × depth × height), one piece at the starting settings.

What you download

An STL or 3MF for any slicer.

Printing it

About 38 g of PLA and about 2 hours 20 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

No supports with the flat foot: it prints standing on it, in white or natural PLA at 100% infill, the top closing in like any dome. Round all over, and the snowy forest (it sits low on the ball), need supports under them (tree supports, touching the bed only, peel away cleanly). Push an LED bauble light or a fairy light’s bulb into the neck (measure it and set the hole to match); hang it by the light’s own loop, or tie a ribbon round the neck. Use only an LED light inside, never a real candle.

Read: 12 personalised Christmas decorations you can 3D print this year

Questions

What light does it take?

An LED bauble light, or a single fairy light’s bulb: measure the part that pushes in and set the hole in the neck to match. Never a real flame.

Does it need supports?

No: it prints standing on a flat foot, the top closing in like any dome, with the neck on top. The picture’s edges slope, so nothing overhangs.

Can it hang on the tree?

Yes, by the light’s own loop or a ribbon tied round its neck. It also stands on a shelf on its flat foot.

How should I print it?

In white or natural PLA at 100% infill. For a warmer light, try the look where the picture glows on a darker wall.

What size is it?

About 80 × 80 × 78 mm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.

More Christmas