Gridfinity Wall Plate
A Gridfinity baseplate for the wall, with magnet holes in every cell so bins with magnets hang on it. Clips onto IKEA SKÅDIS pegboard, goes up on countersunk screws, or sticks on with strips.
Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.
About the Gridfinity Wall Plate
A Gridfinity baseplate for the wall, with magnet holes in every cell so bins with magnets hang on it. It clips onto IKEA SKÅDIS pegboard, screws up with countersunk screws, or sticks on with strips: Gridfinity storage above the bench as well as in the drawers.
What you can change
- Hang it: on SKÅDIS pegboard, on screws and with sticky strips.
- Pick its colour.
- Adjust width, height, board slot width and board slot height, and more.
Size
About 12.6 × 8.4 × 1.1 cm (width × depth × height), one piece at the starting settings.
What you download
An STL or 3MF for any slicer.
Printing it
About 44 g of PLA and about 2 hours 40 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.
Bins need 6 × 2 mm magnets in their feet (the Gridfinity Bin's magnet holes) to hang on it; glue the magnets into the plate's holes too. The plate prints flat on its back with no supports. On SKÅDIS, push a clip into each pocket in its back (hooked ones along the top) and hang it.
Read: Gridfinity explained: sizes, baseplates and how to fit your drawer
Questions
What do the bins need to hang on it?
6 × 2 mm magnets in their feet (the Gridfinity Bin’s magnet holes), and the same magnets glued into the plate’s holes.
How does it fix to SKÅDIS?
Push a clip into each pocket in its back, the hooked ones along the top, and hang it on the board.
What size is it?
About 12.6 × 8.4 × 1.1 cm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.
Which printers and slicers does it work with?
Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.
Can I sell what I make?
On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.