Filamora Studios › Desk & gadgets
Brick Pot
Giant building brick desk pot, stood on end with studs on the side. Choose studs across and up, size and depth.
Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.
About the Brick Pot
A giant building brick desk pot, stood on its end so the studs are on the side, like a brick stuck to the wall. Choose how many studs across and up, the size and the depth, and print it in a bright brick colour for pens, brushes or a small plant.
What you can change
- Size by: width and height and stud spacing.
- Studs on: one side and both sides.
- Inside: thin walls and faceted pocket.
- Studs: part of the pot, printed separately, press-fit and printed separately, screw and glue.
- Adjust width, height, depth and studs across, and more.
Size
About 5 × 4.5 × 10 cm (width × depth × height), one piece at the starting settings.
What you download
An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.
Printing it
About 44 g of PLA and about 2 hours 40 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.
Ideas for using it
- A pen pot for a fan of building bricks, on a desk or in a playroom.
- Several in different colours, lined up like a stack of bricks.
- A make-up brush holder that looks like a toy.
- A succulent pot for a kid’s bedroom windowsill.
Questions
What size is it?
About 5 × 4.5 × 10 cm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.
Do I need a multi-colour printer?
No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.
Which printers and slicers does it work with?
Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.
Can I sell what I make?
On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.