Ridge Plant Hanger

About the Ridge Plant Hanger

A ribbed Ridge wall bracket for a hanging basket: a plate with two countersunk screw holes, an arm out from the wall with a hook curling up at its end, and a brace under it. Choose the reach, the height and the hook. Prints on its side with no supports.

What you can change

• Pick its colour.
• Adjust how many, reach, height on the wall and hook opening, and more.

Size

About 16.4 × 2.4 × 10.5 cm (width × depth × height), one piece at the starting settings.

What you download

An STL or 3MF for any slicer.

Printing it

About 30 g of PLA and about 1 hour 50 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Prints on its side with no supports, so the layers run along the arm and round the hook. Use PETG for outside, and screw it into a stud or with wall plugs. For light baskets: a few kilograms at most.

Ideas for using it

• Hang a trailing plant indoors by a window.
• A hanging basket by the front door, printed in PETG or ASA for outdoors.
• Hang a bird feeder where you can see it from the window.
• A bracket for a lantern or wind chime.

Questions

What size is it?

About 16.4 × 2.4 × 10.5 cm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.