Coaster Set

Round, square or hexagon coasters with a monogram and rim in a second colour, raised or inlaid flush and printed face down for a glassy smooth top, with recesses for stick-on rubber feet and a holder for the stack.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Coaster Set

A personalised coaster set: round, square or hexagon coasters with a monogram and rim in a second colour, raised or inlaid flush, printed face down for a glassy smooth top. Recesses on the back take stick-on rubber feet, and a holder keeps the stack together.

Coaster Set: a customisable 3D print, shown at its starting settings

What you can change

Type your own text on each.
Design: monogram or word and snowflake.
Shape: round, square and hexagon.
Font: 26 to choose from, from script to stencil.
Top: raised design and flush and glassy smooth.
Print: the coasters, the holder and coasters and holder together.
Pick the coaster and design colours.
Adjust coasters, size, letter height and coaster thickness, and more.
Turn on or off: recesses underneath for stick-on rubber feet and raised rim.

Size

About 95 × 95 × 4 mm (width × depth × height), one piece at the starting settings.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

About 74 g of PLA and about 4 hours 20 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Ideas for using it

A wedding or housewarming gift with the couple’s initials.
Coasters for a home bar or coffee table in colours to match the room.
A set for each member of the family with their own initial.
Branded coasters for a café, office or event.

Questions

What size is it?

About 95 × 95 × 4 mm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.