Christmas Napkin Holder

About the Christmas Napkin Holder

A Christmas napkin holder for the table: two trees, snowmen, bells or presents with a star, heart or snowflake cut out, standing in a base with the napkins between them. Three flat pieces that push together.

What you can change

• Shape: christmas tree, snowman, bell and present.
• Cut-out: star, heart, snowflake, little tree and none.
• Pick its colour.
• Adjust height, space for the napkins and panel thickness.

Size

About 12.8 × 6.1 × 13.5 cm (width × depth × height), one piece at the starting settings.

What you download

An STL or 3MF for any slicer.

Printing it

About 70 g of PLA and about 4 hours to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

The two panels print flat and push into the slots in the base. A dab of glue keeps them for good.

Read: 12 personalised Christmas decorations you can 3D print this year

Questions

How does it go together?

The two panels print flat and push into the slots in the base. A dab of glue keeps them for good.

What size is it?

About 12.8 × 6.1 × 13.5 cm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.