Halloween Garland

A garland of bats, ghosts and pumpkins with their faces inlaid, each printed flat with two holes for string or ribbon. Choose one kind or all three in turn, how many and how big.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Halloween Garland

A Halloween garland of bats, ghosts and pumpkins with their faces inlaid, each printed flat with two holes to thread onto string or ribbon. Choose one kind or all three in turn, how many and how big.

Halloween Garland: a customisable 3D print, shown at its starting settings

What you can change

Pieces: bats, ghosts and pumpkins in turn, bats, ghosts and pumpkins.
All 5 colours are yours to pick.
Adjust how many and size.

Size

About 61 × 30 × 67 mm (width × depth × height), one piece at the starting settings.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

About 35 g of PLA and about 2 hours 10 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Each piece prints flat with no supports; the faces are inlaid in the top layers, so swap filament (or let the AMS) for just those. Thread string or ribbon through the two holes along the top of each.

Ideas for using it

Hang it along the mantelpiece or the banister for October.
Decorate a window or front door for trick-or-treaters.
A garland for a Halloween party table or backdrop.
A classroom decoration, printed small and many.

Questions

What size is it?

About 61 × 30 × 67 mm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.