Ridge Shower Hook

About the Ridge Shower Hook

A ribbed Ridge hook that sits on top of your glass shower screen, or a square rail, on a flat top, with a deep hook below for sponges, caddies and towels. Set the glass thickness, the back and the drop. Prints on its side with no supports.

What you can change

• Pick its colour.
• Adjust hooks, glass (or rail) thickness, back and drop, and more.

Size

About 48 × 18 × 97 mm (width × depth × height), one piece at the starting settings.

What you download

An STL or 3MF for any slicer.

Printing it

About 34 g of PLA and about 2 hours to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Ideas for using it

• Hang a towel within reach of the shower.
• A hook for a shower caddy, with no drilling or suckers.
• Hang a loofah or sponge to dry.
• Print in PETG so it shrugs off the steam.

Questions

What size is it?

About 48 × 18 × 97 mm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.