Wine Glass Charms

An open ring that springs onto the stem of a glass, with a guest's name or initial standing up on a label, round, heart or star tag, so everyone knows whose glass is whose. Paste in the guest list for a set.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Wine Glass Charms

Personalised wine glass charms: an open ring that springs onto the stem of a glass, with a guest’s name or initial standing up on a label, round, heart or star tag. Paste in the guest list and print a set for Christmas dinner, a party or a wedding table, so nobody loses their drink.

Wine Glass Charms: a customisable 3D print, shown at its starting settings

What you can change

Type your own name or initial.
Make one, or a whole batch at once: paste a list of names and get one each.
Font: 26 to choose from, from script to stencil.
Tag: rounded label, round, heart and star.
Pick the charm and name colours.
Adjust tag size, glass stem's thickness and grip.

Size

About 29 × 22 × 3 mm (width × depth × height), one piece at the starting settings.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

About 1 g of PLA and about 10 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Prints flat, no supports; swap filament for the name (or let the AMS). Measure the stem with a ruler or calipers. If it's loose, raise the grip; if it won't go on, lower it. PLA springs a little, PETG more.

Questions

Will they fit my glasses?

Measure the thickness of the stem and set it in the designer. The opening is made a little narrower than the stem so it springs on and stays; if it’s loose, raise the grip setting.

Can I print a set with different names?

Yes: paste in everyone’s names and it lays out a charm for each over the plate.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.