Ridge Hanger Hook

About the Ridge Hanger Hook

A ribbed Ridge connector that sits over the top of a clothes hanger, its wire neck through the hole in the top, with a hook down one side or both to hang more hangers underneath. Matches outfits and saves rail space. Set it to your hangers’ thickness.

What you can change

• Sides: both sides and one side.
• Pick its colour.
• Adjust how many, hanger's thickness, hole for the hanger's wire and drop, and more.

Size

About 53 × 22 × 45 mm (width × depth × height), one piece at the starting settings.

What you download

An STL or 3MF for any slicer.

Printing it

About 31 g of PLA and about 1 hour 50 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Ideas for using it

• Hang a top and trousers together as an outfit.
• Save rail space in a small wardrobe.
• Pack outfits for each day of a holiday.
• Group a school uniform or work clothes for the week.

Questions

What size is it?

About 53 × 22 × 45 mm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.