QR Code Sign

A sign for your stall or counter with a QR code for your payment page, shop or socials, Scan to pay (or your logo) over it and a line under it, inlaid in a second colour, in a slotted base.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the QR Code Sign

A QR code sign for your stall, counter or shop window: the code for your payment page, shop or social account, Scan to pay (or your logo) over it and a line under it, inlaid flush in a second colour on a sign that slots into a weighted base.

QR Code Sign: a customisable 3D print, shown at its starting settings

What you can change

Type your own the QR code: a link, payment page or social handle’s address, above the code and under the code.
Add your own logo at the top.
Font: 30 to choose from, from script to stencil.
Pick the sign, code and words and base colours.
Adjust logo height, sign width and lean back.
Turn on or off: my logo is light on a dark background.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

The sign prints face down, the code and words in the first layers: change filament after 0.6 mm (or let your AMS do it), dark on light so phones can read it. Print it on a smooth or textured plate for a neat face. Scan the code with your phone before you take it to a fair. The sign slots into the base.

Questions

Will phones scan a 3D printed QR code?

Yes, as long as it’s dark on light and crisp: the code prints face down in the first layers, which is as sharp as a printer gets. Scan it at home before the fair.

What can the code link to?

Anything with an address: a card reader’s payment link, your shop, Instagram or TikTok, a review page or a Wi-Fi sign-up. Shorter links make bigger, easier squares.

How big should it be?

90 mm wide reads easily from arm’s length across a table; make it bigger for a counter people look at from further away.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.