Price Tags

Price tags for a stall or shop from one list: clips for a shelf or basket edge, tags standing in little bases, or flat tags, the price inlaid in a second colour.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Price Tags

Price tags for a stall or shop: clips that push onto a shelf or basket edge, little tags standing in bases, or flat tags, each with a price and an optional line above it (Keyrings, £5), inlaid flush in a second colour. Make the whole set from one list.

Price Tags: a customisable 3D print, shown at its starting settings

What you can change

Type your own tags.
Style: clips onto a shelf or basket edge, stands up in a little base and flat.
Font: 30 to choose from, from script to stencil.
Pick the tag and words colours.
Adjust shelf or basket edge thickness, tag width and tag height.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

Tags print face down, the words in the first layers: change filament after 0.6 mm (or let your AMS do it). Clips: measure the edge they go on and set its thickness; they push on and pinch it. Standing tags slot into their bases.

Questions

What edge do the clips fit?

Measure it and set the thickness, from a 2 mm wire basket rim to a 30 mm shelf. The two legs lean in a little to pinch it.

How do I write a two-line tag?

Split it with a |: Keyrings|£5 puts Keyrings over a big £5. Commas separate the tags.

Can I reuse them?

Yes: they don’t mark the shelf, and the standing tags lift out of their bases to swap.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.