Filamora Studios › Home & garden

Shelf-Edge Book Display

Clips onto the front edge of a shelf and shows a book cover-out on a leaning back plate with a lipped ledge. Slide the clip along the plate to show the book above the shelf, below it or between, with words like Currently Reading on the lip. Sized to your shelf and your book.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Shelf-Edge Book Display

A book display that clips onto the front edge of a shelf: a U-shaped clip pushes onto the shelf board, a ledge with a lip sticks out in front of it, and a back rest leans back at the angle you choose. Stand a book on the ledge, cover out; slide the clip up or down the back plate to show it above the shelf, hanging below it or anywhere between, with the clip always hidden behind. The ledge can sit at 90° to the back rest so the book sits square, and the lip can carry words like Currently Reading or To Be Read. Set the clip to your shelf’s thickness and the ledge and lip to your book.

Shelf-Edge Book Display by Filamora Studios: a customisable 3D print, shown in use at its starting settings

What you can change

  • Type your own words on the lip.
  • Font: 35 to choose from, from script to stencil.
  • Words: engraved and inlaid in a second colour.
  • Pick its colour.
  • Adjust clip position, shelf thickness, how far it clips onto the shelf and ledge depth, and more.
  • Turn on or off: ledge at 90° to the back plate.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

Prints lying on its side with no supports. Measure your shelf’s thickness exactly: the clip is made a touch bigger, and small bumps on its jaws grip the shelf. PETG flexes more than PLA, so it clips on more easily. Set the ledge a little deeper than your book is thick, and the lip taller for heavier books or bigger words. For inlaid words, the 3MF has the second colour set already.

Ideas for using it

  • Face-out favourites along a bookcase, like a bookshop.
  • The book you’re reading now, on the shelf by your bed.
  • Picture books on a nursery shelf, covers out so children can choose.

On our blog: Gifts for readers you can make

Questions

How do I size the clip?

Measure your shelf’s thickness and type it in exactly: the clip is made a touch bigger, and small bumps on its jaws grip the board. Clipping further onto the shelf holds heavier books more firmly.

Can I put words on it?

Yes: type them in and they go across the front of the lip, engraved or inlaid in a second colour. A taller lip takes bigger words; Currently Reading fits a 12 mm lip on the standard width.

What angle should I choose?

About 15° shows a cover well and keeps the book steady. Go nearer upright for thin books on a busy shelf, or further back for heavy hardbacks.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

My 3MF opens all grey in Bambu Studio. What do I do?

Download the 3MF again: files made before 3 November 2026 open in one colour in Bambu Studio 2.9 and later. A new one brings its colours, and Bambu Studio asks you to match each to one of your filaments. With an older file, File → Import → Import 3D Models (Ctrl+I) often keeps the colours, or select each part and press 1, 2, 3… to put it on that filament.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.

More Home & garden