Filamora Studios › Home & garden

Personalised Cabinet Knobs

Drawer and cupboard knobs with an initial, a number or a little picture on the face, a screw hole in the back for a standard knob screw. In sets, for a child’s room or a craft room.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Personalised Cabinet Knobs

Personalised cabinet knobs: a set of drawer and cupboard knobs, each with a letter, a number or a little picture on its face. Round, square, heart or star, for a child’s room, a craft room or a kitchen.

Personalised Cabinet Knobs by Filamora Studios: a customisable 3D print, shown in use at its starting settings

What you can change

  • Type your own on the knobs.
  • Shape: round, square, heart and star.
  • The screw goes into: the plastic, an M4 heat-set insert and an M4 nut pressed in the back.
  • Letters and pictures: standing up, in a second colour and pressed in.
  • Font: 35 to choose from, from script to stencil.
  • Pick the knobs and letters and pictures colours.
  • Adjust across and sticks out.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

Print face up with no supports, 3 walls and 20% infill or more. Change filament where the letters start (or use an AMS). Fix each with an M4 knob screw from inside the drawer: in plain plastic, drive the screw in slowly the first time to cut its thread. Not a toy: small parts, keep away from small children.

Questions

What screw do they take?

The usual M4 knob screw, from inside the drawer. It can cut its own thread in the plastic, go into an M4 heat-set insert, or into an M4 nut pressed into the back.

How do I write a set?

Commas between them: letters, numbers, or star, heart, cat, dog, paw, tree, ballerina or football for a picture. “1-8” counts out the numbers.

Do they need supports?

No. They print face up, the neck flaring out at 45° to the face.

Are they for small children?

They’re fixed to furniture, but they’re small parts: not a toy, and keep loose ones away from small children.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

My 3MF opens all grey in Bambu Studio. What do I do?

Download the 3MF again: files made before 3 November 2026 open in one colour in Bambu Studio 2.9 and later. A new one brings its colours, and Bambu Studio asks you to match each to one of your filaments. With an older file, File → Import → Import 3D Models (Ctrl+I) often keeps the colours, or select each part and press 1, 2, 3… to put it on that filament.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.

More Home & garden