Filamora Studios › Home & garden
Record Wall Mount
Corner clips or a slim ledge that hold a record sleeve or frame on the wall so it looks like it’s floating, with clips for its top edge.
Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.
About the Record Wall Mount
A record wall mount: show a record on the wall in its sleeve or a frame, held by its bottom edge on a pair of small corner clips (or one slim ledge), with clips for the top edge so it can’t tip. Printed in clear PETG they all but disappear, so the sleeve looks like it’s floating.

What you can change
- Mount: A pair of clips at the corners and one ledge along the bottom.
- For: A record in its sleeve, A gatefold or double album and A record frame.
- Pick its colour.
- Adjust gap, clip width, lip height and back plate height.
- Turn on or off: clips for the top edge too.
What you download
An STL or 3MF for any slicer.
Printing it
Prints lying on its back with no supports. Clear PETG all but disappears on the wall; or match your wall. Screw each piece up through its countersunk hole (a small screw and plug), the bottom clips 300 mm apart for a 12 inch sleeve, then stand the record in them and push the top clips down over its top edge. Measure your sleeve or frame and set the gap to it plus half a millimetre.
Questions
Will it hold a gatefold or a frame?
Yes: set the gap to its thickness plus half a millimetre. A sleeve is about 4 mm, a gatefold 7 to 8 mm, a record frame often 20 mm.
How far apart do the clips go?
For a 12 inch sleeve, about 300 mm apart, so their outer edges line up with the sleeve’s; the top clips the same, the sleeve’s height above.
Which printers and slicers does it work with?
Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.
Can I sell what I make?
On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.
More Home & garden
- Plant Pot
- Name Cookie Cutter
- House Number Plaque
- Plant Markers
- Coaster Set
- Twisted Vase
- Organic Book Holder
- Sunglasses Stand
- Floating Book Display
- Shelf-Edge Book Display
- Book and Coffee Stand
- Can Holder with Handle
- Door Stop
- Ridge Bag Clip
- Name Wall Hooks
- Ridge Wall Hooks
- Ridge Shower Hook
- Ridge Door Hook
- Ridge Slide Clip
- Ridge Hanger Hook
- Ridge Toothpaste Squeezer
- Ribbed Pumpkin
- Pet Bowl Stand
- Ridge Plant Hanger
- Halloween Garland
- Medal Hanger
- Family Toothbrush Holder
- Poop-Bag Holder
- Tilted Desk Organiser
- Cookie Stamp
- 45 Record Adapter
- Charger and Cable Labels
- Laser-Cut Now Playing Stand
- Now Playing Record Holder
- Jewellery Stand
- Terrain Relief
- Heart Photo Frame
- Ribbed Pot Vase
- Ribbed Capsule Vase
- Ribbed Bottle Vase
- Ribbed Teardrop Vase
- Ribbed Pod Vase
- Mug Shelf
- US Road Sign
- Funny Signs
- Laser-Cut Coasters
- Laser-Cut Height Chart
- Personalised Cabinet Knobs
- Family Key Rack
- Initial Bookends
- Moon & Planet Lamp