Filamora Studios › Home & garden

Laser-Cut Height Chart

A height chart cut from ply in lengths that jigsaw together, the centimetres, name and a little picture engraved, with screw holes to hang it. Reads true from the height you hang it at.

Customise it in your browser, then download a print-ready PDF to print at home. No design skills needed.

About the Laser-Cut Height Chart

A laser-cut height chart: lengths of ply that jigsaw together, the centimetres, numbers, name and a little picture engraved, with screw holes to hang it. Each length is as long as your sheets allow.

Laser-Cut Height Chart by Filamora Studios: a customisable printable, shown in use at its starting settings

What you can change

  • Type your own name and beside it.
  • Picture at the bottom: none, A star, A heart and A cat, and 6 more.
  • Name font: 35 to choose from, from script to stencil.
  • Numbers font: 35 to choose from, from script to stencil.
  • Sheet size: 300 × 300 mm, 400 × 300 mm, 20 × 12 in, 600 × 400 mm and my own size.
  • Pick the material colour.
  • Adjust height at its bottom edge, height at its top, width and length of each piece, and more.
  • Turn on or off: inches up the left edge too.

What you download

.

Printing it

Untested: we don’t have a laser cutter yet, so this hasn’t been cut on a real machine. Cut one first. Cut it from 6 mm birch ply (or 3 mm screwed to a board), the marks, numbers, name and picture engraved; the lengths jigsaw together, length 1 at the bottom, and screw to the wall through the holes. In the SVG, red hairlines are to cut and black fills to engrave.

Questions

What do I cut it from?

6 mm birch ply is sturdy enough on its own; 3 mm is fine screwed or glued to a board.

How do I hang it so it measures right?

Its bottom edge is a set height off the floor, 50 cm unless you change it. Measure that up from the floor and screw length 1 there, then jigsaw the rest on above it.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The PDF itself is never for sharing or selling.

More Home & garden