Filamora Studios › Home & garden

Laser-Cut Now Playing Stand

A wooden stand for the record that's playing: a back panel with a pattern cut through it, a base, and a front strip cut into the words Now Playing, put together tab and slot.

Customise it in your browser, then download a print-ready PDF to print at home. No design skills needed.

About the Laser-Cut Now Playing Stand

A laser-cut now playing stand: a wooden back panel with a pattern cut through it (geometric shapes, rings of arcs, or a record and a sound wave), a base, and a front strip whose top is cut into the words, Now Playing or your own. The record that’s on stands between them. It goes together tab and slot, no glue.

Laser-Cut Now Playing Stand by Filamora Studios: a customisable printable, shown in use at its starting settings

What you can change

  • Type your own words.
  • Font: 35 to choose from, from script to stencil.
  • Pattern cut through the back: geometric shapes, rings of arcs, A record and a sound wave and none.
  • Sheet size: 300 × 300 mm, 400 × 300 mm, 20 × 12 in, 600 × 400 mm and my own size.
  • Pick the material colour.
  • Adjust shuffle the pattern, width, back panel height and base, front to back, and more.

What you download

.

Printing it

Untested: we don’t have a laser cutter yet, so this hasn’t been cut and tried on a real machine. The tabs and slots are checked on screen, but cut a small one first, and tell us how it goes. Measure your sheet with calipers and set your kerf: the tabs are cut to match, for a push fit. Push the back panel and the front strip into the base, stand the sleeve between them, and it leans on the back. Stain or oil the wood before you put it together if you like; 3 mm ply works, 4 to 6 mm is sturdier for a big back panel.

Questions

What do I need to cut it?

A laser cutter that opens an SVG (xTool, Glowforge, LightBurn) and plywood: 3 mm works, 4 to 6 mm is sturdier for a big back panel. Measure your sheet and set your kerf so the tabs push in snugly.

Will a 12 inch sleeve fit?

Yes: it stands in the gap between the front strip and the back panel, and a little wider than the stand looks right. Set the gap to your sleeves: about 4 mm for one, 7 mm for a double album.

Can I change the pattern?

Pick geometric shapes, rings or a record and sound wave, and shuffle the shapes and rings until you like them. Or none, for a plain panel to stain or engrave yourself.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The PDF itself is never for sharing or selling.

More Home & garden