Filamora Studios › Home & garden

US Road Sign

A US route shield, state route circle or diamond, county pentagon or historic route sign with your own number and words. Prints flat, no AMS.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the US Road Sign

A US road sign decoration with your own number: a red-and-blue route shield, a state route circle or diamond, a county pentagon or a brown historic route sign. A birthday age, a house number or a lucky number, with words above or below.

US Road Sign by Filamora Studios: a customisable 3D print, shown in use at its starting settings

What you can change

  • Type your own number, small words at the top and words underneath.
  • Sign: US route shield, state route, state route, county route and historic route.
  • Font: 35 to choose from, from script to stencil.
  • Adjust width.
  • Turn on or off: holes to screw it up, I have an AMS and my own colours.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

Prints flat with no supports, and no AMS: each colour starts at its own height, so change filament at each (on the red-and-blue shield: white, blue, white again, then red on top; or tick I have an AMS for the colours side by side). A decoration for a wall, a door or a shed, not for a road.

Questions

Does it need an AMS?

No: each colour starts at its own height, so change filament at each (twice on most signs; four times on the red-and-blue route shield, with the red on top). If you have an AMS, tick I have an AMS for the shield’s colours side by side and ROUTE raised.

Is there an Interstate sign?

No: that shield’s design belongs to the highway officials, so we leave it out.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

My 3MF opens all grey in Bambu Studio. What do I do?

Download the 3MF again: files made before 3 November 2026 open in one colour in Bambu Studio 2.9 and later. A new one brings its colours, and Bambu Studio asks you to match each to one of your filaments. With an older file, File → Import → Import 3D Models (Ctrl+I) often keeps the colours, or select each part and press 1, 2, 3… to put it on that filament.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.

More Home & garden