Filamora Studios › Personalised

Name Tree Ornament

The family's names stacked into a Christmas tree, shortest at the top, with a star above and the year as the trunk: bubble letters on an outline and a coloured backing, printed flat with a loop to hang it.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Name Tree Ornament

A 3D printed name tree ornament: the family’s names stacked into a Christmas tree, the shortest at the top and the longest at the bottom, a star above and the year as the trunk. Bubble letters printed in white on a thin dark outline over a coloured backing, all flat with no supports, and a loop at the top for twine.

Name Tree Ornament by Filamora Studios: a customisable 3D print, shown in use at its starting settings

What you can change

  • Type your own names and year.
  • Order: shortest at the top and as I typed them.
  • Font: 35 to choose from, from script to stencil.
  • On top: star, bell, bauble, heart, snowflake and nothing.
  • Pick the backing, outline and letters colours.
  • Adjust letter width, bubble, letters overlap and lines overlap, and more.
  • Turn on or off: in capitals, gaps where letters meet, outline layer under the letters and loop to hang it.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change.

Printing it

Prints flat with no supports, in three colours by layer: change filament where the outline starts and where the letters start (two changes), or turn the outline off for one. The gaps between the letters are narrow, so print with a 0.4 mm nozzle and check the slicer keeps them. Thread twine or ribbon through the loop, with a wooden bead if you like.

Questions

How many colour changes?

Two: where the outline layer starts and where the letters start. Turn the outline off and it’s one.

How many names fit?

Up to twelve. Two to seven make the best tree shape; with more, make it taller so the letters stay big enough for the gaps between them to print.

Is there a wooden one?

Yes: the laser-cut name tree is the same design in walnut and white, glued in two layers.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

My 3MF opens all grey in Bambu Studio. What do I do?

Download the 3MF again: files made before 3 November 2026 open in one colour in Bambu Studio 2.9 and later. A new one brings its colours, and Bambu Studio asks you to match each to one of your filaments. With an older file, File → Import → Import 3D Models (Ctrl+I) often keeps the colours, or select each part and press 1, 2, 3… to put it on that filament.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.

More Personalised