Name Bunting

Bunting with a flag for each letter of a name or message, in turn in up to three colours, with a star between words. Pennants, swallowtails or banners, each printed flat with two holes for a ribbon.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Name Bunting

Name bunting with a flag for each letter of a name or message, in turn in up to three colours, and a star between words. Pennants, swallowtails or banners, each printed flat with two holes to thread onto a ribbon.

Name Bunting: a customisable 3D print, shown at its starting settings

What you can change

Type your own name or words.
Font: 26 to choose from, from script to stencil.
Flags: pennants, swallowtails and round-bottomed banners.
Pick the flags, flags, flags and letters and stars colours.
Adjust flag width.
Turn on or off: A star flag between words.

Size

About 45 × 23 × 55 mm (width × depth × height), one piece at the starting settings.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change; or a PDF to print on paper or card and cut out.

Printing it

About 30 g of PLA and about 1 hour 50 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

Each flag prints flat with no supports; the letters are inlaid in the top layers, so swap filament (or let the AMS) for just those. Thread a ribbon through the two holes along the top of each, in order. On paper: print the PDF at 100% (actual size) on card, and cut along the fine grey lines; then thread the flags on a ribbon.

Ideas for using it

A child’s name above their bed or across a nursery wall.
Happy Birthday bunting to bring out every year.
A message for a wedding, a baby shower or a retirement party.
Decorate a shop window or a stall.

Questions

What size is it?

About 45 × 23 × 55 mm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.