Filamora Studios › Personalised

Bookmarks

Bookmarks with a name or short quote running up their length and a tassel hole: rounded, ribbon-ended or arched. Comma-separate for a batch.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Bookmarks

Personalised bookmarks with a name or a short quote running up their length and a hole for a tassel: rounded, ribbon-ended or arched. Type several names separated by commas to print a batch, one each.

Bookmarks: a customisable 3D print, shown at its starting settings

What you can change

  • Type your own names or words and second line.
  • Make one, or a whole batch at once: paste a list of names and get one each.
  • Shape: rounded, ribbon end and arched top.
  • Font: 26 to choose from, from script to stencil.
  • Pick the base and text colours.
  • Adjust length, letter height, second line letter height and letter spacing, and more.
  • Turn on or off: raised rim round the edge.

Size

About 4.1 × 15 × 0.2 cm (width × depth × height), one piece at the starting settings.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change; or a PDF to print on paper or card and cut out.

Printing it

About 11 g of PLA and about 45 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

On paper: print the PDF at 100% (actual size) on card, and cut along the fine grey lines; punch the tassel hole where it is marked.

Ideas for using it

  • A gift for a book lover with their name or favourite line.
  • A class set for World Book Day, with every child’s name.
  • Party bag fillers for a reading-themed birthday.
  • A thank-you for a teacher or a book club host.

Read: 3D printed bookmarks for book lovers

Questions

What size is it?

About 4.1 × 15 × 0.2 cm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.

More Personalised