Toploader & Sleeve Desk Caddy

A desk caddy for trading card supplies, each bay sized to how many you keep: penny sleeves lying flat in a bay with a low front to slide them off, toploaders and semi-rigids standing behind a lip, and a bay for PSA, BGS, CGC or SGC slabs if you want one. Four layouts, one square with a bay for cards; toploaders for standard to 180pt cards, a castle theme or a textured outside, or set your own counts and sizes. Prints with no supports.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Toploader & Sleeve Desk Caddy

A desk caddy for a trading card collector’s supplies, each in a bay sized to how many you keep: penny sleeves lying flat in a pile, in a bay with its front cut low to slide them off, and toploaders, semi-rigids, sleeved cards and graded slabs standing up behind a lip. Set the counts and it sizes itself; prints upright with no supports.

Toploader & Sleeve Desk Caddy: a customisable 3D print, shown at its starting settings

What you can change

Bays: penny sleeves, toploaders and semi-rigids, penny sleeves and toploaders, penny sleeves only and square: cards, penny sleeves, toploaders and semi-rigids.
Toploaders for: 35pt cards, 55pt cards, 75pt cards, 100pt cards, 130pt cards and 180pt cards.
Front cuts’ corners: rounded and angled.
Theme: plain and castle: bricks, battlements and windows.
Texture outside: none, lines, tiles, bricks, diamonds and honeycomb.
Pick its colour.
Adjust how many toploaders, how many semi-rigids, wiggle room in each bay and walls as high as, and more.
Turn on or off: A bay for graded slabs, A divider between the toploaders and semi-rigids and plinth round the foot.

What you download

An STL or 3MF for any slicer.

Questions

How many does it hold?

As many as you set. The Start from buttons hold 30 toploaders, 45 semi-rigids and hundreds of penny sleeves; or 55 toploaders with wiggle room and the sleeves; or the sleeves alone.

Can it hold graded slabs?

Yes: tick A bay for graded slabs, set how many, and pick PSA, Beckett (BGS), CGC or SGC for the slab size. They stand in a bay of their own behind the penny sleeves (or the semi-rigids, in the square layout), so it’s no wider, with ridges between them so they don’t touch.

Can it look like a castle?

Yes: pick the Castle theme (or its Start from button) for brick walls, battlements along the top and arched windows into the bays. Or keep it plain and press a texture into the outside: lines, tiles, bricks, diamonds or honeycomb.

What about thick cards?

Pick what your toploaders are for, from 35pt (standard) to 180pt for patch and relic cards, and the toploader bay follows their thickness.

My toploaders are a different size

Measure one and type its width, height and thickness under Sizes; the bays follow. The same goes for semi-rigids (Card Saver I by default), slabs and penny sleeves.

Does it need supports?

No. It prints standing up as it’s used, the front cuts open at the top.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs, for as long as your membership is active: if it ends, stop selling them. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.