Blog

The parts our templates use

12 November 2026

Most of our designs are just the print. A few need a little something you can't print: a switch for the click, a magnet to hold, a bearing to spin. Here's everything they use, so you can get a pack of each and be ready.

You don't need to work out how many: every template has a What you'll need list under the designer, worked out from your settings. Change a Gridfinity bin's size and its magnet count changes with it.

Keyboard switches

Our clickers click because there's a real mechanical keyboard switch inside: the Christmas Clicker and the other clickers, the Keyboard Fidget Keychain and the Capsule Vending Machine. They take MX-style switches, the most common kind. Clicky ones (often blue) give the most satisfying click. A pack of 100 is cheap and lasts a whole Christmas of clickers.

Magnets

Round neodymium magnets, glued into pockets the designs leave for them. Check which way round they go before the glue sets, so they attract rather than push apart.

Bearings and nuts

The Fidget Spinner spins on a 608 bearing (8 × 22 × 7 mm), the skateboard size. A good one in the middle spins longest; more bearings or M8 nuts in the arms add weight. The spool adapter uses 608s too.

Keyring hardware

Keyrings need a split ring, ideally with a short chain so they hang nicely: 25 mm rings suit most of ours. Badges need a lanyard with a clip, and bead bracelets elastic cord.

Lights

The Christmas Village House, the lantern and the pumpkin are made for LED tea lights, and the bigger lithophane lamps for battery LED puck lights. Never a real flame in a plastic print.

For cards, prints and laser cuts

Some of the "What you'll need" items link to a shop. Those are affiliate links: we may earn a little if you buy, at no cost to you, and they help keep the designer going.

Make it yours