Filamora Studios › Choosing a 3D printer

Bambu Lab H2C Combo vs H3C

Bambu Lab H2C Combo

Pick it if: The H2 with a nozzle changer: it swaps between induction-heated hotends from a rack, so many-colour prints waste far less filament than one nozzle purging between colours.

Bambu Lab H3C

Pick it if: Bambu Lab’s tool changer: nine PrintTools, each with its own filament path and heated nozzle, docked and ready, so it swaps colour or material in about six seconds with very little waste.

The differences

Colour

H2C Combo: It prints in more than one colour: up to 7 materials from its rack of nozzles, with almost no purging. Our multi-colour designs come out in their colours in one go, from a 3MF.

H3C: It prints in more than one colour: nine PrintTools, so nine colours or materials with almost no purging. Our multi-colour designs come out in their colours in one go, from a 3MF.

Our popular templates on each

Questions

What’s the difference between the Bambu Lab H2C Combo and the H3C?

The H3C has the bigger plate: 330 × 320 mm, against the H2C Combo’s 325 × 320 mm. Both are enclosed. They print the same 122 of our 123 templates in one piece. For colour, the H2C Combo has up to 7 materials from its rack of nozzles, with almost no purging; the H3C has nine PrintTools, so nine colours or materials with almost no purging.

Which prints more of your templates, the H2C Combo or the H3C?

Both print the same 122 of our 123 3D templates in one piece.

Can the H2C Combo and the H3C print in colour?

The H2C Combo: It prints in more than one colour: up to 7 materials from its rack of nozzles, with almost no purging. Our multi-colour designs come out in their colours in one go, from a 3MF. The H3C: It prints in more than one colour: nine PrintTools, so nine colours or materials with almost no purging. Our multi-colour designs come out in their colours in one go, from a 3MF.

Which is cheaper to run?

A typical 50 g print takes about 2 h 15 min and costs about £1.09 on the H2C Combo, and about 2 h 15 min and £1.09 on the H3C, in PLA and electricity at typical UK prices. The filament is the same; the difference is speed and power.

Choosing a 3D printer