Table Names

Wedding and party table names, with an optional small line over each (Table, or Table 1, 2, 3...). Print them on paper as folded tent cards or flat cards to cut out, or 3D print them with raised lettering and a stand each. Rounded, square or arched, with a line or double border.

Customise it in your browser, then download a print-ready STL, or a multi-colour 3MF. No CAD skills needed.

About the Table Names

Wedding and party table names, with an optional small line over each, such as Table, or Table 1, 2, 3. Print them on paper as folded tent cards or flat cards to cut out, or 3D print them with raised lettering and a stand each. Rounded, square or arched, with a line or a double border.

Table Names: a customisable 3D print, shown at its starting settings

What you can change

Type your own table names and small line over the name.
Name font: 26 to choose from, from script to stencil.
Small line font: 26 to choose from, from script to stencil.
Cards: folded tent cards and flat cards.
Shape: rounded corners, square corners and arched top.
Border: none, A line and A double line.
Paper: A4, A3, A5 and US Letter.
Pick the lettering, border and card colours.
Adjust card width and card height.
Turn on or off: number them on the small line and cut marks at the corners.

Size

About 29.7 × 21 × 0 cm (width × depth × height), one piece at the starting settings.

What you download

An STL for any slicer, and a 3MF with each colour as its own part, ready for an AMS or a filament change; or a PDF to print on paper or card and cut out.

Printing it

About 49 g of PLA and about 2 hours 50 minutes to print, one piece at the starting settings (15% infill, 2 walls, 0.2 mm layers, on a Bambu Lab A1). Your slicer gives the exact figures for your printer and settings.

On paper: print the PDF at 100% (actual size) on card, then cut along the marks; fold tent cards on the dashed line, so the name reads from both sides. On a 3D printer: each card prints flat with its lettering raised (one filament change, or two with a border in its own colour), and drops into its stand.

Ideas for using it

Name each table after places you’ve been together.
Use favourite films, songs or books as table names.
Tent cards for a party at home, printed on card.
3D printed names that guests can take home.

Questions

What size is it?

About 29.7 × 21 × 0 cm (width × depth × height), one piece at the starting settings. Every size is a setting, so make it as big or small as you need.

Do I need a multi-colour printer?

No. Print it in one colour, or in colours with a filament change: the Colours line under the 3D view says at which height to change. With an AMS or another multi-colour printer, the 3MF prints it in one go.

Which printers and slicers does it work with?

Any FDM printer. The STL opens in every slicer; the 3MF keeps the colours as separate parts in Bambu Studio, Orca Slicer, PrusaSlicer and Cura. Pick your printer in the designer to check it fits the plate.

Can I sell what I make?

On Pro and Ultimate you can sell the prints you make, for example on Etsy or at craft fairs. On Free and Maker, print it for yourself or give it as a gift. The STL and 3MF files themselves are never for sharing or selling.