Filamora Studios › Choosing a 3D printer

Creality K2 Plus Combo vs Bambu Lab H2S

Creality K2 Plus Combo

Pick it if: Creality’s big enclosed flagship: a 350 mm cube with a heated chamber, and the CFS colour system in the Combo (four colours, up to 16).

Bambu Lab H2S

Pick it if: Bambu Lab’s biggest single-nozzle printer: 340 × 320 × 340 mm, enclosed, with an actively heated chamber and a 350 °C hotend for engineering filaments.

The differences

Colour

Creality K2 Plus Combo: It prints in more than one colour: up to 4 colours with the CFS (in the Combo), and 16 with more units. Our multi-colour designs come out in their colours in one go, from a 3MF.

Bambu Lab H2S: It prints in more than one colour: many colours with AMS units. Our multi-colour designs come out in their colours in one go, from a 3MF.

Our popular templates on each

Questions

What’s the difference between the Creality K2 Plus Combo and the Bambu Lab H2S?

The Creality K2 Plus Combo has the bigger plate: 350 × 350 mm, against the Bambu Lab H2S’s 340 × 320 mm. Both are enclosed. They print the same 122 of our 123 templates in one piece. For colour, the Creality K2 Plus Combo has up to 4 colours with the CFS (in the Combo), and 16 with more units; the Bambu Lab H2S has many colours with AMS units. The Bambu Lab H2S costs about £150 less in the UK.

Which prints more of your templates, the Creality K2 Plus Combo or the Bambu Lab H2S?

Both print the same 122 of our 123 3D templates in one piece.

Can the Creality K2 Plus Combo and the Bambu Lab H2S print in colour?

The Creality K2 Plus Combo: It prints in more than one colour: up to 4 colours with the CFS (in the Combo), and 16 with more units. Our multi-colour designs come out in their colours in one go, from a 3MF. The Bambu Lab H2S: It prints in more than one colour: many colours with AMS units. Our multi-colour designs come out in their colours in one go, from a 3MF.

Which is cheaper to run?

A typical 50 g print takes about 2 h 15 min and costs about £1.10 on the Creality K2 Plus Combo, and about 2 h 15 min and £1.09 on the Bambu Lab H2S, in PLA and electricity at typical UK prices. The filament is the same; the difference is speed and power.

Choosing a 3D printer