Filamora Studios › Choosing a 3D printer

Bambu Lab P2S vs X2D

Bambu Lab P2S

Pick it if: For printing a lot, or tougher materials: faster, and enclosed.

Bambu Lab X2D

Pick it if: A 256 mm enclosed printer with two nozzles and an actively heated chamber: two materials (or a soluble support) with far less waste than one nozzle swapping, and engineering filaments that need warmth.

The differences

Colour

P2S: It prints in more than one colour: up to 4 colours with the AMS 2 Pro (in the Combo), and 20 with more units. Our multi-colour designs come out in their colours in one go, from a 3MF.

X2D: It prints in more than one colour: two nozzles, and up to 25 colours with AMS units. Our multi-colour designs come out in their colours in one go, from a 3MF.

Our popular templates on each

Questions

What’s the difference between the Bambu Lab P2S and the X2D?

Both have a 256 × 256 mm plate. Both are enclosed. They print the same 120 of our 123 templates in one piece. For colour, the P2S has up to 4 colours with the AMS 2 Pro (in the Combo), and 20 with more units; the X2D has two nozzles, and up to 25 colours with AMS units. The P2S costs about £120 less in the UK.

Which prints more of your templates, the P2S or the X2D?

Both print the same 120 of our 123 3D templates in one piece.

Can the P2S and the X2D print in colour?

The P2S: It prints in more than one colour: up to 4 colours with the AMS 2 Pro (in the Combo), and 20 with more units. Our multi-colour designs come out in their colours in one go, from a 3MF. The X2D: It prints in more than one colour: two nozzles, and up to 25 colours with AMS units. Our multi-colour designs come out in their colours in one go, from a 3MF.

Which is cheaper to run?

A typical 50 g print takes about 2 h 25 min and costs about £1.07 on the P2S, and about 2 h 15 min and £1.07 on the X2D, in PLA and electricity at typical UK prices. The filament is the same; the difference is speed and power.

Choosing a 3D printer