Filamora Studios › Choosing a 3D printer

Bambu Lab A1 vs Anycubic Kobra 4 Combo

Bambu Lab A1

Pick it if: A first printer with room for bigger things: organisers, lamps and signs.

Anycubic Kobra 4 Combo

Pick it if: Multi-colour on a budget, with a plate a little bigger than the A1’s.

The differences

Colour

Bambu Lab A1: It prints in more than one colour: up to 4 colours with the AMS lite (in the Combo). Our multi-colour designs come out in their colours in one go, from a 3MF.

Anycubic Kobra 4 Combo: It prints in more than one colour: several colours with its colour unit (in the Combo). Our multi-colour designs come out in their colours in one go, from a 3MF.

Our popular templates on each

Questions

What’s the difference between the Bambu Lab A1 and the Anycubic Kobra 4 Combo?

The Anycubic Kobra 4 Combo has the bigger plate: 260 × 260 mm, against the Bambu Lab A1’s 256 × 256 mm. Both are open-frame printers, for PLA and PETG. They print the same 120 of our 123 templates in one piece. For colour, the Bambu Lab A1 has up to 4 colours with the AMS lite (in the Combo); the Anycubic Kobra 4 Combo has several colours with its colour unit (in the Combo). The Bambu Lab A1 costs about £120 less in the UK.

Which prints more of your templates, the Bambu Lab A1 or the Anycubic Kobra 4 Combo?

Both print the same 120 of our 123 3D templates in one piece.

Can the Bambu Lab A1 and the Anycubic Kobra 4 Combo print in colour?

The Bambu Lab A1: It prints in more than one colour: up to 4 colours with the AMS lite (in the Combo). Our multi-colour designs come out in their colours in one go, from a 3MF. The Anycubic Kobra 4 Combo: It prints in more than one colour: several colours with its colour unit (in the Combo). Our multi-colour designs come out in their colours in one go, from a 3MF.

Which is cheaper to run?

A typical 50 g print takes about 2 h 55 min and costs about £1.07 on the Bambu Lab A1, and about 2 h 25 min and £1.07 on the Anycubic Kobra 4 Combo, in PLA and electricity at typical UK prices. The filament is the same; the difference is speed and power.

Choosing a 3D printer